Bachelor of Engineering (Mechatronic) (Honours)
Help engineer the future. Forget about robots coming to take your job – instead, make it your job to design the robots and automated systems of the future! Mechatronics is an exciting field that combines the best of mechanical, electrical and electronic and computer engineering to create new technologies and constantly improve the systems around us
In this program you will:
- Study the fundamentals of engineering, including applied maths, physics, statistics and system design
- Learn about robotics and autonomous systems, communication engineering, digital logic and computer programming, machine vision and more
- Choose the area you want to specialise in, including electrical and electronic or mechanical engineering, management or entrepreneurship
- Gain hands-on project management experience
Location
CRICOS code
Entry threshold
ATAR/RankDuration
Full-time or equivalent part-time Only a full-time option is available to international students on a Student visa. Online programs are not available to Student visa holders.Indicative fees
Indicative 2022 fees ($AUD)
CSP Annual fee / Estimated total feeQTAC code
Start
- Semester 1
- Semester 2
- Start
-
- Semester 1
- Semester 2
- Delivery mode
-
- Blended Learning
- Total courses
- 32
- Total units
- 384
- Duration
- 4 years 4 years
- CRICOS code
- 0100795
- UniSC program code
- SC405
- Program coordinator
Introductory courses (8) 96 units
ENG101 Foundations of Engineering
ENG102 Engineering Statics
ENG103 Introduction to the Internet of Things
ENG104 Introduction to Engineering Design
MTH103 Introduction to Applied Mathematics
MTH104 Introductory Calculus
SCI107 Physics
SCI110 Science Research Methods
Developing courses (8) 96 units
ELC200 Digital Logic and Computer Programming
ELC201 Analog Electronic Circuits
ELC205 Control Systems
MEC200 Thermofluids 1
MEC205 Dynamics 1
MEC221 Mechanics of Materials
MEC225 Engineering Materials
MCH200 Mechatronic Design 1
Graduate courses (12) 144 units
MTH201 Calculus II and Linear Algebra
MTH203 Numerical Analysis
ELC301 Communications Engineering (Hardware and protocols)
ELC304 Embedded System Design
ENG302 Engineering Project Management
ENG304 Engineering Research Methodology
MCH301 Mechatronic Design 2
MEC336 Engineering System Design
ELC400 Robotics and Autonomous Systems #
ENG401 Engineering Project 1
ENG402 Engineering Project 2
MCH400 Image Processing and Machine Vision
Minor courses (4) 48 units
Students must select one of the following minor study areas:
- Electrical and Electronic Engineering (for Mechatronic Engineers)
- Mechanical Engineering (for Mechatronic Engineers)
- Civil Engineering (for Mechanical and Mechatronic Engineers)
- Climate Change and Coastal Zone Studies
- Environmental Studies for Engineers^
- Management for Engineers^
- Wider Engineering Studies
^Not available at Moreton Bay campus.
Honours
The Bachelor of Engineering (Mechatronic) (Honours) may be awarded with a class of Honours to a
student:
- with the percentage results achieved in twelve courses as specified in the table below; and
- achieving at least 65% in ENG402 Engineering Research Project 2.
| Courses |
| MTH203 Numerical Analysis |
| MCH200 Mechatronic Design 1 |
| ELC301 Communications Engineering (Hardware and protocols) |
| MEC336 Engineering System Design |
| ENG302 Engineering Project Management |
| MCH301 Mechatronic Design 2 |
| ELC304 Embedded System Design |
| ENG304 Engineering Research Methodology |
| ENG401 Engineering Project 1 |
| ENG402 Engineering Project 2 |
| ELC400 Robotics and Autonomous Systems # |
| MCH400 Image Processing and Machine Vision |
- The minimum levels of achievement normally required for each class of honours are shown in the following table:
| Honours results classification | Overall Percentage attained in Specified Courses* |
| Honours Class I | 80% - 100% |
| Honours Class IIA | 70% - 79% |
| Honours Class IIB | 60% - 69% |
*The percentage result shall be rounded up if ≥ 0.5 or rounded down if < 0.5.
Note: Program structures are subject to change. Not all USC courses are available on every USC campus.
This study sequence reflects the current program structure. Continuing students must follow their commencing structure, which can be found in the previous student handbooks.
Explore the likely peer cohort in the student profile data
No admissions data available
In UniSC admitted new student{{ studentProfile.model.allStudents > 1 || studentProfile.model.allStudents[0] === '<' ? 's' : '' }} at the {{ studentProfile.getLocationByCode() }} campus
| Applicant background | No. of students | % of all students |
|---|---|---|
Notes
<5 - the number of students is less than 5
N/A - Students not accepted in this category
N/P - Not published: the number is hidden to prevent calculation of numbers in cells with less than five students.
Adjusted ATARs are a calculation of a student's ATAR + eligible adjustment factors and are used to determine admission. The raw ATAR is the student's rank before any adjustments are applied.
Entry requirements
For entry into most USC undergraduate degree programs, you need to have completed a minimum level of education similar to successful completion of Australian Year 12 with good grades.
Further studies, for example, a semester or more at college or university, can also be considered for entry and may give you credit transfer towards a degree.
Some examples of upper secondary qualifications and a guide to the minimum grades that USC will consider are listed here. These are minimum requirements and do not guarantee entry. Some programs may require higher grades. Alternative qualifications may also be considered on a case by case basis.
If your qualification (grouped by country) is not listed, send the qualification transcripts with your application form to the International Office for assessment.
English language requirements
If English is not your first language, you also need to meet the minimum English language requirements for your chosen program. If you do not meet the minimum requirements, you may like to enrol in one of our English Language Programs.
Minimum entry threshold
Applicants must meet the minimum ATAR/Rank.
| Location | ATAR/Rank |
|---|---|
| Moreton Bay | 61.00 |
Post admission requirements
Students must complete 60 days of suitable engineering work experience.
Additional entry information
Applicants from a non-English speaking background should refer to the English language requirements for further information.
Exemption for first year Mathematics
Students who enter the program having achieved a ‘Very High Achievement’ in Maths C in secondary school may be eligible for an exemption for the courses MTH103 Introduction to Applied Mathematics and MTH104 Introductory Calculus. On application, and approval, to Student Services and Engagement, students may substitute two engineering-relevant courses in order to fulfil the requirements of the degree. Students are advised to consult with the program coordinator when selecting substitute courses.
- Prerequisites
English (Units 3 and 4, C), Maths Methods (Units 3 and 4, C)
- Recommended prior study
- Specialist Maths; and Physics or Chemistry
Program requirements
In order to graduate you must:
- Successfully complete 384 units as outlined in the Program Structure
- Select a minor from one of the minors as listed below. Students must choose the minor to be studied before the completion of Semester 1, Year 3
- Complete a minimum of 60 days of suitable work experience. Students must meet all costs associated with the acquisition of practical experience to satisfy this requirement
Program notes
- Completing this program within the specified (full-time) duration is based on studying 48 unit points per semester (normally 4 courses) and following the recommended study sequence
- The unit value of all courses is 12 units unless otherwise specified
- It is each students responsibility to enrol correctly according to your course requisites, program rules and requirements and be aware of the academic calendar dates
- Courses within this program are assessed using a variety of assessment methods including essays, seminar presentations, reports, in-class tests and examinations. Not all courses will necessarily include all methods
- As part of your USC program, you may apply to Study Overseas to undertake courses with an overseas higher education provider
- Refer to the Managing your progression page for help in understanding your program structure, reviewing your progress and planning remaining courses.
Prospective students must consider the Inherent Academic Requirements before applying to study this program.
Refer to Engineering programs - Inherent Academic Requirements
USC strongly supports the rights of all people to pursue studies. The University embraces diversity and endeavours to accommodate all students.
What are Inherent Academic Requirements (IARs)?
The IARs of a program are those fundamental skills, capabilities and knowledge that students must be able to demonstrate in order to achieve the essential learning outcomes of the program, while maintaining the academic integrity of that program.
Students with a disability or chronic health condition may be able to have reasonable adjustments made to enable them to meet these requirements.
USC is committed to making reasonable adjustments to teaching and learning, assessment, placement and other activities to enable students to participate in their program.
Reasonable adjustments must not fundamentally change the nature of the IAR.
Consideration is given to a student's cultural and religious background/beliefs, which may impact on participation in their program or course. For further information contact Student Support.
Why are Inherent Academic Requirements (IARs) important?
IARs ensure the academic integrity of a program is maintained and preserves the University's learning, assessment and accreditation processes. They must be met by all students.
How does this affect you?
To successfully complete a program at USC, you need to be able to meet all the Inherent Academic Requirements.
If you are applying for a program, you should read the IAR statement carefully to ensure you are able to meet them.
If you have a disability or chronic health condition, contact a USC Disability Advisor to talk about the adjustments that may be put in place so you can meet the requirements.
Career opportunities
- Automotive
- Data communications
- Industrial engineering
- Manufacturing
- Product design
- Robotics engineering
Memberships
Graduates may be eligible to become members of:
- Engineers Australia
Accreditation
This program is currently undergoing provisional accreditation by Engineers Australia.
Headstart Program - Year 11 or 12
The Headstart program lets you study uni subjects while you’re still in high school. If you successfully complete two Headstart courses, you’ll get a selection rank that you could use to get into uni.
Early Offer Guarantee scheme - Year 12
The Early Offer Guarantee scheme enables Year 12 students to be offered a place at USC on the basis of their Principal's recommendation.
Previous qualifications or experience
If you:
- have completed Year 12 (no matter how long ago)
- have a TAFE/VET qualification
- have relevant work experience, or
- have studied at university before (even if you didn’t complete your studies)
You may be eligible for a selection rank, which can help you get into uni. For more detailed information selection ranks and how applications are assessed, visit Admissions explained.
Tertiary Preparation Pathway
If you don’t have qualifications or experience that will give you a selection rank, you can complete the Tertiary Preparation Pathway as a stepping stone into most degrees. You can also use TPP to complete subject prerequisites.
If you haven’t studied in a while, TPP is also a great way to brush up on essential study skills like critical reading, assignment writing and referencing.
It can also build your knowledge and confidence in the subject areas you’ll need for your degree, like science or maths. TPP courses are fee-free for eligible domestic students.
I identify as Aboriginal or Torres Strait Islander
You may be eligible for direct entry into a USC degree based on your potential to succeed, under USC’s Indigenous Direct Entry and Access Scheme (IDEAS). All you have to do is complete an online application through our website.
- CSP estimate
- A$7,008
- Annual tuition fee ($AUD, 2022)
- A$29,600
- Estimated total tuition fee ($AUD, 2022)
- A$118,400
Commonwealth supported places
Commonwealth supported places are substantially subsidised by the Australian Government so that students only pay 'student contribution" amounts. The student contribution amount will vary depending on the course you are studying and how much funding the Government provides.
If you accept a Commonwealth supported place you are a Commonwealth supported student. As a Commonwealth supported student you must make a contribution towards the cost of your education (unless you are enrolled in Enabling or Tertiary Preparation Pathway courses) with the majority of the cost met by the Commonwealth Government.
Commonwealth supported places are only available to domestic students. As a domestic student you are entitled to a Commonwealth supported place in an eligible program if you:
- meet the citizenship and residency requirements
- complete an electronic Commonwealth Assistance Form (eCAF)
- meet the University's entry requirements for your chosen program.
International fee-paying places
Estimated total tuition fees are based on 2022 rates and the minimum number of courses required within the programs standard duration.
Annual tuition fees are based on 2022 rates and the equivalent full-time student load as per the recommended study sequence in the relevant program.
Actual fees payable are based on the actual enrolment load in a teaching period (excluding Study Abroad and Postgraduate Qualifying Pathway).
All prices quoted are in Australian Dollars (A$).
Domestic applicants apply for admission through the Queensland Tertiary Admissions Centre (QTAC). Some applicants may be eligible to apply direct to USC if they meet certain criteria.
Find out about how to apply and key application closing dates.
No matter what kind of future you’re looking for, you can find it at USC. Our programs offer the choice and flexibility you need to get started on any career goal.
Visit How to apply for simple steps to submit your international student application and start your USC experience today.
Need help with submitting your application?
USC has appointed representatives to assist you with submitting your application and provide information about the steps you need to complete to begin your studies. You can contact a USC Representative in your area.
Any questions? Contact us.
QTAC code
| Location | QTAC code |
|---|---|
| Moreton Bay | 014721 |
Student story
“I enjoyed the diverse range of subjects, as well as the different options for further study and the learning opportunities that were offered. I also appreciated how hands-on the learning approach was, with field trips and opportunities to learn from practical experiences.”